Product overview
The isolating switch consists of a bracket, a base, a pillar insulator, a contact, a wiring board and other parts. The pillar insulator and the conductive part are installed on the base, and the intersection angle of the two pillar insulators is 50°. The base is fixed on a bracket tilted 25°. The bracket is equipped with a shaft connected to the operating mechanism. It can be equipped with CS17G manual operating mechanism or electric mechanism such as CJ6.
Ordering instructions
Outdoor isolating switch models and specifications;
Environmental conditions of use (ambient temperature, altitude, environmental pollution level)
Operating mechanism model:
The name and quantity of spare parts, special tools and equipment (need to be ordered separately).
outdoor high voltage disconnector used for open of closing circuits under voltage but no-load condition in 12KV outdoor electrical system
outdoor high voltage disconnector used for open of closing circuits under voltage but no-load condition in 40KV outdoor electrical system
12KV disconnect switch is mainly composed of a contact, a contact knife, insulator and an underframe.
It is suitable for three-phase AC 50Hz, 10kV/15kV/20kV rated voltage outdoor high-voltage electrical equipment.
GN27 (GN2)-40.5 indoor high-voltage isolating switch is a three-phase AC 50Hz high-voltage switching device.
Solve the pollution flashover problem that occurs during the operation of the isolating switch.
The complete set of isolating switch is composed of GW4-252 isolating switch body, CS14G or CS17G human operating mechanism, transmission accessories, etc.
GW5-40.5、72.5、126 Series outdoor high voltage AC disconnector
The isolating switch consists of a bracket, a base, a pillar insulator, a contact, a wiring board and other parts.
Copyright © 2021 By JGGY Electrical.com